Connecting to a Projector on a Network and Projecting
Connecting to a Projector on a Network and Projecting
Operating the Projector
Before connecting, put the projector into connection standby status.
Make sure the projector network settings are complete, and the projector
is connected to network equipment such as a network hub via a
commercially available network cable.
Procedure
A
Press the [t] button on the remote control to turn the power
on.
B
Press the LAN button on the Remote Control.
The LAN standby screen is displayed.
If there is no signal for the current input source, it automatically
switches to the LAN source. If it does not automatically switch to
the LAN source, press the LAN button.
Operating the Computer
In the following explanations, unless otherwise noted, Windows screen
shots are used. Similar screens are also displayed for Mac OS.
13