About Crestron Roomview® (Eb-G5950/G5650W Only); Operating A Projector From A Computer Window; Displaying The Operation Window - Epson EB-G5950 User Manual

About Crestron RoomView
®
Crestron RoomView is an integrated control system provided by
®
Creston . It can be used to monitor and control multiple devices connected
on a network.
The Projector supports the control protocol, and can therefore be used in a
system built with Crestron RoomView
®
Refer to the Creston website for details on Crestron RoomView
English-language displays are supported.)
http://www.crestron.com
An overview of Crestron RoomView
• Remote operation using a Web browser
A Projector can be operated from a computer window just like using a
remote control.
• Monitoring and control with application software
®
Crestron RoomView Express or Crestron RoomView
®
provided by Creston can be used to monitor devices in the system, to
communicate with the help desk, and to send emergency messages. Refer
to the following website for details.
http://www.crestron.com/getroomview
This manual describes operating procedures in the computer window using
a Web browser.
® (EB-G5950/G5650W only)
®
.
®
. (Only
®
is provided below.
®
Server Edition
• Only single-byte alphanumeric characters and symbols can be
q
entered.
• The following functions cannot be used while using the Crestron
®
RoomView .
Web Control s p.112
Message Broadcasting (EasyMP Monitor plugin)
• Controling is possible if Standby Mode is set to Communication
On from the Extended menu of the projector's configuration menu,
even if the projector is in standby state (when the power is off).
p.61
s

Operating a Projector from a Computer Window

Displaying the operation window

Confirm the following before performing the procedure.
• Make sure the computer and projector are connected to the network.
When communicating with a wireless LAN, connect in Advanced mode.
p.70
s
• Set RoomView to On on the Others menu under the Network menu.
p.80
s
Procedure
A
Start the Web browser on the computer.
B
Enter the IP address of the projector in the address field of the
Web browser, and press the [Enter] key on the keyboard.
The operation window will be displayed.
119