Connecting To A Projector On A Network And Projecting; Operating The Projector; Operating The Computer - Epson EB-Z8050W Operation Manual

Connecting to a Projector on a Network and Projecting

Operating the Projector

Before connecting, put the projector into connection standby status.
Make sure the projector network settings are complete, and the
projector is connected to network equipment such as a network hub via
a commercially available network cable.
Procedure
A
Press the [ ] button on the remote control to turn the
t
power on.
B
Press the [LAN] button on the Remote Control.
The following LAN standby screen is displayed.

Operating the Computer

In the following explanations, unless otherwise noted, Windows screen
shots are used. You see the same screens even when using Macintosh.
Procedure
A
Start EasyMP Network Projection.
For Windows
Select Start - Programs (or All Programs) - EPSON Projector -
EasyMP Network Projection.
For Macintosh
Double-click the Applications folder of the hard drive volume in
which EasyMP Network Projection is installed, and then
double-click the EasyMP Network Projection icon.
B
The Connection mode screen opens, select "Advanced
Connection Mode" and then click "OK".
The projector search results are displayed.
To always connect using Advanced Connection Mode, select Set
the selected Connection Mode as the default mode for future
connections. in the Connection mode screen.
C
Select the projector you want to connect to, and then click
"Connect".
You can select up to four projectors connected to the same
network and project the same images at the same time.
If the projector you want to connect to is not displayed in the
search results, click the Automatic search button. The search
takes about 30 seconds.
For details on the connection screen, see "Using the Connection
Screen". p.14
s
12