Interpreting Event Ids (Eb-G5950/G5650W Only); Interpreting Event Ids (Eb-G5950/G5650W Only) - Epson EB-G5950 User Manual

Problem Solving

Interpreting Event IDs (EB-G5950/G5650W only)

Check the event ID and perform the remedy given below. If the problem cannot be solved, contact the network administrator or one of the following contact
addresses. Epson Projector Contact List
s
Event ID
0432 Failed to startup EasyMP Network Projection.
0435
0434 Network communication is unstable.
0481
0482
0485
0433 An image that was transferred cannot be reproduced.
0484 Communications was cut off from the computer.
04FE EasyMP Network Projection ended unexpectedly.
04FF A system error occurred in the projector.
0891 The same SSID access point cannot be found.
0892 The WPA and WPA2 authentication methods are not the same.
0893 The WEP, TKIP, and AES encoding methods are not the same.
0894 Communications was cut off because a connection was made to the
wrong access point.
0898 Failed to obtain the DHCP.
0899 Other connection errors
Cause
Restart the projector.
Check the status of network communications. Wait for a while and then try connecting again.
Restart EasyMP Network Projection.
Check the status of network communications. Restart the projector.
Restart the projector.
Set the computer, the access point, and the projector to the same SSID.
Check the setting of wireless LAN security to see if it is correct. s Network Menu - Security
Menu p.67
Check with the network administrator and follow their instructions.
Check the DHCP server to see if it is operating correctly and check the LAN cable to see if it is
connected correctly. Turn off DHCP if it is not being used. s Network Menu - Wireless LAN
Menu p.70, Wired LAN Menu p.78
If the problem cannot be solved by restarting the projector or EasyMP Network Projection, contact
one of the following contact addresses. s
Remedy
Epson Projector Contact List
99