Epson EB-G5950 User Manual page 58

Signal Menu
Sub Menu
HDMI Video Range
Input Signal
Video Signal
Aspect
*2
Overscan
Reset
*1 When a component video or RGB video signals are input, this setting can be set only when 480i, 576i, or 1080i signals are being input.
*2 This cannot be set when a digital RGB signal is input.
*3 This can be set only when the HDMI output on the connected equipment is connected to the HDMI input port on the projector.
*3
If the range is set to Auto , the video level of the input signal will be automatically determined, for example, when the HDMI input port is
connected to a DVD player. If the range is set to Auto and the image shows whiteout or blackout, set the video level according to the video
level setting of the DVD player. The video level of the DVD player may be set to Normal or Expanded.
You can select the input signal from the Computer1 input port, Computer2 input port, or BNC input port.
If Auto is set, the input signal is identified automatically according to the connected equipment.
If colors do not appear correctly when this is set to Auto, select the appropriate signal according to the connected equipment.
You can select the input signal from the Video1 input port, Video2 input port, and S-Video input port. If set to Auto, video signals are
recognized automatically. If interference appears in the image or a problem occurs such as no image is being projected when set to Auto,
select the appropriate signal according to the connected equipment.
g
You can set the Aspect Ratio for projected images. s
You can change the Output Scaling (the range of projected image). The range of trimming screen can be set to Off, 4%, or 8%. You can
select Auto *3 only when the input source is HDMI. When Auto is selected, the range is automatically switched to Off or 8% according to
the input signal.
You can reset all adjustment values on the Signal menu to their default settings, except for Input Signal.
To return all menu items to their default settings, see s
Function
p.29
p.83
58