When Wep Is Selected - Epson EB-G5950 User Manual

Network Menu (EB-G5950/G5650W)

When WEP is selected

Sub Menu
WEP Encryption
Format
Key ID
Encryption Key 1/Encryption
Key 2/Encryption Key 3/
Encryption Key 4
You can set the encryption for WEP encoding.
128 Bit: Uses 128 (104) bit encoding
64 Bit: Uses 64 (40) bit encoding
You can set the input method for the WEP encrypted key.
ASCII: Input text. The method of inputting the encrypted WEP with text differs depending on the access point. Check with the network administrator
for the network in which the projector participates, and then set to "ASCII".
HEX: Input in hexadecimal.
Selects the WEP encryption ID key.
You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the
network in which the projector participates. The type of character and the number that can be entered differ according to the WEP Encryption and
Format settings.
If the number of characters you enter is shorter than the required character length, no character is encrypted. If the number of characters you enter is
longer than the required character length, characters that exceed the permitted number are not encrypted.
128 Bit - ASCII: Single-byte alphanumerics, 13 characters.
64 Bit - ASCII: Single-byte alphanumerics, 5 characters.
128 Bit - HEX: 0 to 9 and A to F, 26 characters
64 Bit - HEX: 0 to 9 and A to F, 10 characters
Function
73