Image Colors Are Not Right; Images Appear Dark - Epson EB-G5950 User Manual

Problem Solving
Check
Is Position adjusted correctly?
Is the computer set for dual display?
Only when projecting computer images
Is the correct resolution selected?
Only when projecting computer images

Image colors are not right

Check
Do the input signal settings match the signals from the connected
device?
Is the image Brightness set correctly?
Are the cables connected correctly?
g
Is Contrast adjusted correctly?
Is the Color Adjustment correctly?
Are the Color Saturation and Tint adjusted correctly?
Only when projecting images from a video source

Images appear dark

Check
Is the image Brightness set correctly?
g
Is Contrast adjusted correctly?
Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
adjustment when projecting the computer analog RGB signals. If the images are not adjusted correctly after using
automatic adjustment, you can make the adjustments using Position from the configuration menu.
Apart from computer analog RGB signals, you can adjust other signals while projecting by adjusting Position from the
configuration menu. s Signal Menu - Menu Position
If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting. s
Computer video driver documentation
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.151
Change the setting according to the signal for the connected equipment. s Signal Menu - Input Signal, Video Signal
p.57
Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness
Check that all the cables required for projection are securely connected. s p.133,
Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast
Adjust the Color Adjustment setting from the configuration menu. s Image Menu - Color Adjustment
Adjust the Color Saturation and Tint settings from the configuration menu. s Image Menu - Color Saturation, Tint
p.55
Adjust the Brightness and Power Consumption settings from the configuration menu.
s Image Menu - Brightness p.55 s Settings Menu - Power Consumption
Adjust the Contrast setting from the configuration menu.
s Image Menu - Contrast p.55
Remedy
p.57
s Computer documentation
Remedy
Remedy
p.59
95
p.55
p.135
p.55
p.55