Using The Operation Window - Epson EB-G5950 User Manual

About Crestron RoomView® (EB-G5950/G5650W only)

Using the operation window

A
The following operations will be performed when the buttons are clicked.
Button
Power Turns the projector power on or off.
Vol-/Vol+ Adjust the volume.
A/V Mute Turns the video and audio on or off. s
B
Switch to the image from the selected input source. To display input sources that
are not shown in the window, click (a) or (b) to scroll up or down. The current
video signal input source is displayed in blue.
C
The following operations will be performed when the buttons are clicked. To
display buttons that are not shown in the window, click (c) or (d) to scroll left or
right.
Function
p.38
Button
Freeze Images are paused or unpaused. s
Contrast Adjusts the difference between light and shade in the
images.
Brightness Adjusts the image brightness.
Color Adjusts the color saturation for the images.
Sharpness Adjusts the image sharpness.
Zoom
Click the [z] button to enlarge the image without
changing the projection size. Click the [x] button to
reduce an image that was enlarged with the [z] button.
Click the [
position of an enlarged image. s
D
Clicking the [ ], [ ], [ ], or [ ] button performs the same operation as the
[h] button on the remote control. The following operations will be performed
when the other buttons are clicked.
Button
OK Performs the same operation as the [Enter] button on
the remote control. s
Menu Displays and closes the configuration menu.
Auto If clicked when the computer analog RGB signals are
being projected, automatically optimizes the image by
adjusting the Tracking, Sync., and Zoom Position.
Search Switches to the image from the input port where video
signals are being input. s
Esc Performs the same operation as the [Esc] button on the
remote control. s
E
The following operations will be performed when the tabs are clicked.
120
Function
p.38
], [ ], [ ], or [ ] button to change the
p.40
Function
p.16
p.27
p.16