Adjusting The Projected Image; Displaying A Test Pattern - Epson EB-G5950 User Manual

Adjusting the Projected Image

Displaying a Test Pattern

A test pattern can be displayed to adjust the projection status without
connecting video equipment. This is useful when installing a projector.
If the [User] button on the remote control is set to Test Pattern, the
q
test pattern will be displayed when the [User] button is pressed. (The
default setting is Test Pattern.)
Procedure
A
Press the [Menu] button while the projector is projecting.
Select Settings - "Test Pattern", then press the [Enter] button.
Using the Remote Control Using the Control panel
B
Press the [ ] button on the remote control in the [
h
or press the [Enter] button on the control panel to switch the
test pattern.
To display the previous image, press the [
control in the [ ] direction.
l
Using the Remote Control
The following adjustments can be made while the test pattern is being
displayed.
• Zoom and focus adjustment
• Projected image position adjustment
• Projected image keystone correction
• Selecting the projection quality (Selecting Color Mode)
• Brightness adjuctment
s
• Sharpness adjustment (Standard only)
p.55
• Color temperature adjustment
p.55
• Color adjustment
Image menu - Color Adjustment
s
] direction
r
] button on the remote
h
Using the Control panel
Quick Start Guide
s
p.22
s
p.22
s
s
Image menu - Brightness p.55
Image menu - Sharpness
s
Image menu - Abs. Color Temp.
s
p.55
21
p.33