Settings Menu - Epson EB-G5950 User Manual

Settings Menu

EB-G5950/G5900/G5650W/G5600
Sub Menu
Keystone
Split Screen
Control Panel Lock
Pointer Shape
Power Consumption
Volume
Audio Input
You can correct keystone distortion.
H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone. s
Use the [w/ ], [v/ ], [</ ] and [>/ ] buttons on the control panel to perform similar corrections to V-Keystone and H-Keystone.
Quick Corner: Selects and corrects the four corners of the projected image. s
You can split the screen into two screens. s
You can use this to restrict operation of the projector's control panel. s
You can select the shape of the pointer. s
Pointer 1: Pointer 2: Pointer 3:
You can set the lamp brightness to Normal or ECO.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected, the
amount of electricity consumed and the lamp's operating life are changed as follows, and the fan rotation noise during projection is reduced. Electrical
consumption: about 16% decrease, lamp life: about 1.5 times longer
You can adjust the volume. Setting details are saved for each source and each image signal.
HDMI Audio Input: When the input source is HDMI, audio is output from the projector using the port that is set here.
LAN Audio Input (EB-G5950/G5650W only): When the image from a computer that is connected through the network is being projected, audio is
output from the projector using the port that is set here. When transferring audio from the computer to the projector to output it, select LAN.
Function
p.23
p.34
p.51
p.39
EB-G5800/G5500
p.25
59