Network Functions; Projecting With "Connect To A Network Projector; Making A Wps (Wi-Fi Protected Setup) Connection With A Wireless Lan Access Point; Connection Setup Method - Epson EB-G6750WU User Manual

Network Functions

This chapter explains the additional functions for networks.

Projecting with "Connect to a Network Projector"

The projector supports the Windows "Connect to a Network Projector"
function. For more information about the "Connect to a Network Projector"
function, see the documentation supplied with your computer or the
Microsoft's Web site.
a
• Make sure the computer and projector are ready to connect to the
network.
• When using "Connect to a Network Projector", change the
projector's source to LAN.
• When the projector password screen is displayed, enter the keyword
shown at the bottom of the LAN standby screen.
• You can connect only one projector to a computer.
• When using Network Projector from Options in Windows Meeting
Space, set the colors for the computer screen you are using to the
highest level (32bit). If it is not capable of a 32bit display, a message
is displayed and you cannot connect.
Making a WPS (Wi-Fi Protected Setup) Connection
with a Wireless LAN Access Point
There are two methods for setting WPS
• Push Button Method
SSID and security are set automatically when the [
on the projector's control panel and the dedicated button on the access
point equipment. This method is recommended when the projector and
access point are close together.
g .
] button is pressed
• PIN Code Method
SSID and security are set automatically by inputting an 8-digit code that
was assigned to the projector from the computer to the access point in
advance. Make connection settings between the computer and the access
point in advance. For details on how to make this connection, refer to the
manual provided with the access point. This method is recommended
when the projector is mounted on the ceiling.
a
Refer to the documentation for the access point device and to the
following section when using any connection method other than WPS.
s "Wireless LAN menu"

Connection Setup Method

a
Press the [Menu] button.
"Using the Configuration Menu"
s
b
Select Network Configuration from Network.
The Network Configuration screen is displayed.
c
From Wireless LAN select To Setup Wizard.
p.92
p.78
142