Advanced Wireless Settings; Chapter 4 Advanced Settings - Advantech EKI-6311GN User Manual

Chapter 4

4.1 Advanced Wireless Settings

Open "Advanced Settings" in "Wireless" to make advanced wireless settings.
Figure 6 Advanced Wireless Settings
A-MPDU/A-MSDU Aggregation
The data rate of your AP except wireless client mode could be enhanced greatly with this option
enabled; however, if your wireless clients don't support A-MPDU/A-MSDU aggregation, it is not
recommended to enable it.
Short GI
Under 802.11n mode, enable it to obtain better data rate if there is no negative compatibility
issue.
RTS Threshold
The EKI-6311GN sends RTS (Request to Send) frames to certain receiving station and
negotiates the sending of a data frame. After receiving an RTS, that STA responds with a CTS
(Clear to Send) frame to acknowledge the right to start transmission. The setting range is 0 to
2346 in byte. Setting it too low may result in poor network performance. Leave it at its default of
2346 is recommended.
Fragmentation Length
EKI-6311GN-User_Manual V2.1
Advanced Settings
ƒ‰‡