Advanced Setting/Mpk Ext Settings (For Gxv3240 Ext Board 1/2/3/4); Firmware Version 1.0.1.27 - Grandstream Networks GXV3240 Administration Manual

Display Format
Show DisplayName from
Server

ADVANCED SETTING/MPK EXT SETTINGS (FOR GXV3240 EXT BOARD 1/2/3/4)

Key Mode
Account
Name
UserID

Firmware Version 1.0.1.27

Configures the display format for the multi-purpose keys. Users could
select display "Name", "UserID", or "Name (UserID)". "Name" is the one
saved in GXV3240 Contacts. The default setting is "Name".
Configure whether the display name from server side will be shown or
not. The default setting is "No".
Assigns a function to the Multi Purpose Key on the GXV3240EXT.
The key mode options are:

Speed Dial
Press to dial the extension configured in UserID field.

Busy Lamp Field (BLF)
Monitor the extension status as configured in UserID field.

Call Transfer
Transfer the current active call to the extension configured in UserID
field.

Call Intercom
Intercom/paging to the extension configured in UserID field.

Speed Dial via Active Account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is
active, it will call the configured extension using account 2.

Dial DTMF
Dial the DTMF digits filled in UserID field during the call.

Eventlist BLF
Similar to the BLF option but in this mode the PBX collects the
information from the phones and sends it out in one single SIP
NOTIFY message. The PBX server has to support this feature.
When selected, eventlist URI needs to be filled out under web
GUI->Advanced Settings->MPK General Settings.

Call Park
Enter the UserID as the call park/pickup extension provided from the
PBX server to park or pick up the call. The PBX server has to
support this feature.
Selects the SIP Account used for the multi-purpose keys.
Configures the display name for the multi-purpose key.
Configures the UserID for the corresponding multi-purpose key mode.
GXV3240 Administration Guide Page 51 of 76