Advanced Settings/Mpk Ext Settings (For Gxv3240 Ext Board 1/2/3/4) - Grandstream Networks GXV3240 Administration Manual

Advanced Settings/MPK EXT Settings (For GXV3240 Ext Board 1/2/3/4)

Key Mode
Account
Name
UserID
MPK ID
Display Format
Assigns a function to the Multi-Purpose Key in the MPK app.The key mode
options are:
•
Speed Dial
Press to dial the extension configured in UserID field.
•
Busy Lamp Field (BLF)
Monitor the extension status as configured in UserID field.
•
Call Transfer
Transfer the current active call to the extension configured in UserID
field.
•
Call Intercom
Intercom/paging to the extension configured in UserID field.
•
Speed Dial via Active Account
Similar to Speed Dial but it will dial based on the current active account.
For example, if the phone is off-hook and account 2 is active, it will call
the configured extension using account 2.
•
Dial DTMF
Dial the DTMF digits filled in UserID field during a call.
•
Eventlist BLF
This option is similar to the BLF option, but in this case, the PBX collects
the information from the phones, and sends it out in one single notify
message. PBX server has to support this feature.
•
Call Park
Configure the call park feature code to park or pick up the call.
•
Multicast Paging
Configure the IP address and port for establish a multicast paging call.
•
Speed Conference
Initiate a conference to the extension configured in UserID field.
•
Dial Prefix
When an MPK is set to "Dial Prefix" mode, pressing on the MPK will put
the prefix into dial pad without dialing out.
It is used to select the SIP Account assigned with the multi-purpose keys.
It is used to configure the display name for the multi-purpose key.
It is used to configure the UserID for the corresponding MPK key mode.
It is used to identify the "MPK ID x" for "MPK x". The default number is from
1-160 for 160 MPKs in 4 GXP2200EXT boards. For example, if MPK 1's
MPK ID is changed from 1 to 5, users will see configuration saved on MPK5.
It is used to set the display format for the multi-purpose keys. Users could
select display "Name", "UserID", or "Name (UserID)". "Name" is the one
saved in phone contacts. The default setting is "Name".
GXV3240 Administration Guide
Version 1.0.3.207
P a g e |
77