Firmware Version 1.0.1.27 - Grandstream Networks GXV3240 Administration Manual

Ip multimedia phone for android
Hide thumbs Also See for GXV3240:
Table of Contents

Advertisement

Disable Missed Call Indicator
Disable MWI Indicator
Disable New Message
Indicator
Disable Contact or Message
Full Indicator
Disable Indicator When LCD is
Off
RJ9 Headset TX Gain (dB)
RJ9 Headset RX Gain (dB)
Headset Type
Headset Key Mode

Firmware Version 1.0.1.27

unchecked missed call on the phone. The default setting is "No".
If set to "Yes", the LED indicator on the upper right corner of the
GXV3240 will not light up when there is missed call on the phone. The
default setting is "No".
If set to "Yes", the LED indicator on the upper right corner of the
GXV3240 will not light up when there is new voicemail on the phone.
The default setting is "No".
If set to "Yes", the LED indicator on the upper right corner of the
GXV3240 will not light up when there is new message on the phone.
The default setting is "No".
If set to "Yes", the LED indicator on the upper right corner of the
GXV3240 will not light up when the contact storage or message storage
is full. The default setting is "No".
If set to "Yes", the LED indicator on the upper right corner of the
GXV3240 will not light up when the LCD screen is off. The default
setting is "No".
Select the transmission gain of the headset. The default setting is +6dB.
Select the receiving gain of the headset. The default setting is +6dB.
Selects whether the connected headset is normal RJ11 headset,
Plantronics EHS headset or Jabra EHS headset.
When headset is connected to the phone, users could use the
HEADSET button in two different modes:
1. Default Mode
When the phone is in idle, press HEADSET button to offhook
the phone and make calls by using headset. Headset icon will
display on the top of the call screen in dialing/talking status;
When there is an incoming call, press HEADSET button to pick
the call by using headset;
When there is an active call using headset, press HEADSET
button to hang up the call;
When Speaker/Handset is used in dialing/talking status, press
HEADSET button to switch to headset. Press it again to hang up
the call, or press Speaker/Handset to switch back to previous
mode.
2. Toggle Headset/Speaker
When the phone is in idle, press HEADSET button to switch to
GXV3240 Administration Guide
Page 62 of 76

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents