Wi-Fi Basics
ESSID
Password
MAINTENANCE/TIME SETTINGS
Assign NTP Server Address
DHCP Option 42 override NTP
server
DHCP Option 2 to override
Time Zone setting
Time Zone
Time Display Format
Date Display Format
MAINTENANCE/WEB/SSH ACCESS
Disable SSH
Access Method
Port
Admin Password
Confirm Admin Password
User Password
Firmware Version 1.0.1.27
Fill in the ESSID you would like to save the Wi-Fi password.
Enter the password for the ESSID.
Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server. The default setting is us.pool.ntp.org.
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set
up on the LAN. The default setting is "Yes".
Allows device to get provisioned for Time Zone from DHCP Option 2 in
the local server automatically. The default setting is "No".
Controls the date/time display according to the specified time zone.
12-hour or 24-hour time display format
Configures the date display format on the LCD. The following formats
are supported:
Normal (M/DD/YYYY): 1/31/2012
YYYY/MM/DD: 2012/01/31
MM/DD/YYYY: 01/31/2012
DD/MM/YYYY: 31/01/2012
The default setting is DD/MM/YYYY.
If set to "Yes", the phone will not allow any SSH access to the phone.
The default setting is "No".
Allows users to select HTTP or HTTPS for Web Access. The default
setting is HTTP.
By default, HTTP uses port 80 and HTTPS uses port 443. This field is for
customizing the web port.
Allows users to change the admin password. The password field is
purposely hidden after clicking "Save" button for security purpose. This
field is case sensitive with a maximum length of 32 characters. The
default admin password is "admin".
Type the new Admin Password again to confirm.
Allows the administrator to set the password for user-level web GUI
GXV3240 Administration Guide
Page 54 of 76