Line; Shared Line; Extension; Park Orbit - Snom 320 System User's Manual

S N O M U S E R ' S G U I D E

Line

This is programmed and managed by Pacific LightNet. Pacific LightNet does not support users
programming their own line keys. Line keys are required for incoming and outgoing calls. Some features
are common to all Line keys:
1. Pressing a key when its LED is blinking and the phone is ringing accepts the call.
2. Pressing a key when a call is in progress on that line, as indicated by the constantly lit LED, puts
the call on hold.
3. Pressing a key when its LED is blinking and a call is on hold will take that call off of hold
(reconnect the call).

Shared Line

This is programmed and managed by Pacific LightNet. Pacific LightNet does not support users
programming their own shared line appearance keys.

Extension

This is programmed and managed by Pacific LightNet. Pacific LightNet does not support users
programming their own extension keys. Extension keys are used for features such as Line State
Monitoring (Busy Lamp Field) which are configured by Pacific LightNet based upon the requirements
defined during your installation. To modify these buttons please have your Business Group Administrator
contact your Pacific LightNet Sales Representative or Installation Coordinator.

Park Orbit

Call Park Orbits allow a user to place a call on hold on one phone station and retrieve the call from any
other station which also subscribed to that Call Park Orbit. Each Park Orbit may keep a single call on
hold at any given time. Each Call Park Orbit requires one button to be programmed on each phone that is
subscribed to that Park Orbit. Up to nine (9) Call Park Orbits may be programmed for a Business Group.
This is programmed and managed by PLNI. PLNI does not support user programming of Park Orbits.

Call Park Orbit User Operation

To Park a call, press the Call Park button for the orbit you want to park the call on. That Call Park button
will begin to blink on each phone which is subscribed to that Call Park Orbit. To retrieve the parked call
from another phone, press the blinking Call Park button. You will be connected to the caller and the Call
Park Orbit button will stop blinking on all phones subscribed to that Call Park Orbit.

DTMF Codes

Pacific LightNet does not support DTMF code features via programmable keys at this time.

Push2Talk

This is programmed and managed by PLNI. PLNI does not support users programming their own
Push2Talk keys at this time.
20