Fujitsu DL7400 User Manual page 159

User's Manual
5. Place the two mounting pins on the ribbon support brackets of
the head cartridge. (The two mounting pins are located on the
sides of the ribbon release levers.) Insert the ribbon so that the
ribbon falls between the nose of the print head and the plastic
print guide.
Installing the new ribbon cartridge
6. Press the ribbon release levers until the mounting pins snap into
the holes on the ribbon support brackets. Gently pull on the
cartridge to verify that the pins are securely positioned in the
holes.
7. Turn the ribbon feed knob clockwise to tighten the ribbon.
8. Close the front cover of the printer.
Note:
The buzzer may sound if the print head is moved while the
power supply is ON.
MAINTENANCE
6-5