Fujitsu DL7400 User Manual page 135

User's Manual
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
Options
CONFIG
Items
TOF-CTL
DRIVER
SETUP
<CUTEDIR>
FRONT
REAR
<CSFEDIR>
FRONT
REAR
<CUTEJCT>
AUTO
MANUAL
<FL-CENT>
POSN1
POSN2
USING SETUP MODE
Description
Setting of priority on TOF control to
a printer driver specification or a
setup specification. TOF control
determines the amout of the top
margin when paper is fed to the home
position.
Driver specification is given priority.
Setup specification is given priority.
Selection of the eject direction of cut
sheets with manually feeding of cut
sheets
Ejected to the front.
Ejected to the rear.
Selection of the eject direction of cut
sheets with use of a CSF
Ejected to the front.
Ejected to the rear.
Selection for automatic ejection of
cut sheets
Automatic ejection of cut sheets
when no cut sheet is detected
No automatic ejection of cut sheets
when no cut sheet is detected
Selection of the print carrier position
when paper is fed via a front path
(with feeding of continuous forms
paper from the front, use of a front
CSF, and manual feeding of cut
sheets)
Position 1: Column 31
Position 2: Column 42
5-45