Assembling The Printer; Setting The Paper Table - Fujitsu DL7400 User Manual

ASSEMBLING THE
PRINTER
User's Manual
This section explains how to setting the paper table and ribbon cartridge.

Setting the paper table

Turn the paper table (1) as shown in the table below, then push it (2) and
set it (3).
The complete setup conditions are shown below. Make sure that the top
end of the paper table is engaged with the printer guide pin and the guide
pin on the paper table is inserted into the cover groove.
NOTE
Do not apply unreasonable force while you are setting the paper
table. It could cause damage. Also, do not leave the paper table in
incomplete setting. Running the printer with the paper table left in
incomplete conditions could cause a paper jam.
SETTING UP
2-5