Fujitsu DL7400 User Manual page 134

USING SETUP MODE
5-44
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
Options
CONFIG
Items
SKIP-PR
ENABLE
DISABLE
STATUS
ENABLE
DISABLE
BANDCTL
ENABLE
DISABLE
Description
Setting of printing speed change
processing (skip)
The skip processing is executed.
When a certain amount of blank
spaces are found in a line, it
changes the printing speed for the
blank spaces.
The skip processing is not executed.
It does not change the printing
speed for the blank spaces.
- If the printing speed of the
printing data varies before and
after the blank spaces (such as
LQ characters + blank space +
CQ characters), it changes
printing speeds regardless of
this setting.
Setting of the asynchronous status
function
The status information is stored in
the send buffer by a nibble mode
request.
The status information is not stored
in the send buffer by a nibble mode
request.
Setting of reducing backward line
feeds as much as possible.
Backward line feeds occur when
printing vertical enlargement
characters or multi-path characters
which involve several printing
paths for a print activation.
Reduce control is performed.
Reduce control is not performed.
User's Manual