Fujitsu DL7400 User Manual page 131

User's Manual
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
Options
CONFIG
Items
<AREACNT>
ENABLE
DISABLE
<CUT-ONL>
OFFLINE
ONLINE
<CNT-ONL>
OFFLINE
ONLINE
<LOCK>
NONE
SETUP
ALL
USING SETUP MODE
Description
Area-over detection control.
Detects the left and right edges of
paper when loading the paper.
The printer does not print data
beyond the edges, but turns on the
AREA OVER indicator.
Does not detect the edges. Select
this option when you are using
colored or preprinted paper.
Printer status after loading paper in
offline mode for single sheets.
Remains offline after paper loading.
Goes into online after paper
loading.
Printer status after loading paper in
offline mode for continuous forms.
Remains offline after paper loading.
Goes into online after paper
loading.
Lock function of setup mode.
Enables all buttons on the control
panel.
Disables the setup-related buttons
to keep the printer from entering
setup mode during the offline state.
Disables the setup-related buttons
and the MENU button.
Once this setting has been selected,
setup mode cannot be entered from
the control panel. To cancel this
setting, turn the power on while
simultaneously pressing the HI
IMPACT, PAPER PATH, and
LF/FF buttons.
5-41