Changing The Default Startup Action (Auto_Action) - DEC 600s Owner's Manual

Changing the Default Startup Action (auto_action)

The default setting for the
Default Setting
depends on whether your system has factory-installed software.
Workstations and servers with factory-installed software are set
to BOOT, all other systems are set to HALT.
To set the
Command
Syntax command:
>>> set auto_action parameter
Enter the parameter of your choice from Table 10–2 to set the
default startup action.
Command This command sets the default startup action to halt at the
console prompt each time your system is turned on. The system
Example
responds with a confirmation of the action you have chosen.
>>> set auto_action 3
AUTO_ACTION = HALT
>>>
10–6 Changing Environment Variables
auto_action
environment variable, enter the following
auto_action
Return
Return
environment variable