Connecting To A 10Base-T Ethernet Network - DEC 600s Owner's Manual

Connecting to a 10BASE-T Ethernet Network

Connecting to a 10BASE-T Ethernet Network
Procedure To connect your system to a 10BASE-T Ethernet network,
Overview sometimes referred to as a twisted-pair network, complete the
following tasks.
1. Connect the 10BASE-T cable to the 10BASE-T port on the
2. Connect the other end of the cable to the network connection,
5–6 Connecting Your System to a Network
back of the system unit as shown in Figure 5–2, making sure
that the cable is attached securely.
if necessary.