Components And Parts To Save - DEC 600s Owner's Manual

Unpacking a Workstation System
You do not need the parts shown in Figure 2–4 during
Save These
Parts for Later installation. However, please save them for future use.
Figure 2–4 Components and Parts to Save
10BASE-T Loopback
Connector
Modem Loopback
Connector
Printer Port
Terminator
For Users in To comply with certain international standards, Digital includes
Germany German regulatory information (sometimes referred to as the
FTZ postcard) in every system and monitor box. Disregard this
material if your system is not located in Germany.
For Users In The yellow warning label attached to the shipping container and
Australia system unit is required by the country of Australia for systems
that provide ISDN functionality but are not yet certified for use
in Australia. Disregard these labels if your system is not located
in Australia.
2–8 Preparing to Install Your System
Antistatic
Wrist Strap
Network
Label
Screwdriver
MLO-011247