Startup Problems; Power Indicator Light Failure - DEC 600s Owner's Manual

Startup Problems

Startup Problems
There are many different causes of system startup problems.
Overview
Locate the problem you are having in the following sections.
Power Indicator If the power indicator light does not come on when you turn on
Light Off your system, see Table 13–4. The indicator light
Figure 13–1.
Figure 13–1 Power Indicator Light
Table 13–4 Power Indicator Light Failure
Possible Cause
Power cord is not connected.
Wall socket is inoperative.
Defective power supply.
13–6 Identifying a Problem
1
is shown in
Corrective Action
Check the power cord connections at
both ends.
Try a different wall socket, or try an
electrical device that you know works
in the wall socket.
Contact your Digital service
representative.
MLO-009416