Initializing Your
After you have run a test, you should use the following command
System
to initialize your system to clear the error log from the system
register. Figure 14–3 shows an example of the
Figure 14–3 Initializing Your System
>>> init
INIT-S-CPU...
INIT-S-RESET_TC...
INIT-S-ASIC...
INIT-S-MEM...
INIT-S-NVR...
INIT-S-SCC...
INIT-S-NI...
INIT-S-SCSI...
INIT-S-ISDN...
>>>
Return
Running Diagnostic Tests
command.
init
Running Diagnostic Tests 14–9