The show
The
memory
the memory in your system. This command lists a line of
Display
information about each memory bank. Note that the display
will not indicate an error found in memory. You can only
display memory errors using the
command. The
The show
Figure 13–7 shows an example of a
memory
Display
Figure 13–7 The show memory Display
>>> show memory
DEC 3000 - M600 Memory: 64 Mbytes
------------------------------------------
BANK #
------
>>>
Elements in the
Figure 13–7 indicates that memory banks 0 and 1 each have 32
show memory
megabytes of memory. There is no memory in banks 2 and 3 on
Display
this system.
command displays information about all of
show memory
test
commands are described in Chapter 14.
MEMORY_SIZE
-----------
0
032 Mbytes
1
032 Mbytes
2
000 Mbytes
3
000 Mbytes
Interpreting the show Command Displays
or the
show error
show mem
command display.
START_ADDRESS
-------------
0x00000000
0x02000000
0x00000000
0x00000000
Identifying a Problem 13–19
test memory