Before You Begin; How To Identify A Problem - DEC 600s Owner's Manual

Before You Begin

Before You Begin
i
Two Ways to There are two ways to solve problems with the system:
Solve System
1. Use the chapters in Part III of this manual to help identify
Problems
2. Contact your Digital service representative to diagnose and
Methods Table 13–1 lists ways to identify problems, and indicates where
to Identify each method is described:
Problems
Table 13–1 How to Identify a Problem
To identify a problem this way...
Using the troubleshooting
tables
Running diagnostic tests
Using the troubleshooting tables in this chapter is the easiest
and most direct approach to identifying and correcting a problem
with your system. Therefore, this is the method with which you
should begin.
The diagnostic tests described in Chapter 14 let you test specific
devices and provide information on the source of your problem.
13–2 Identifying a Problem
and possibly fix the problem yourself.
fix the problem for you.
Refer to...
This chapter
Chapter 14