Choosing A Location; Dimensions Of System - DEC 600s Owner's Manual

Choosing a Location

Choosing a Location
When choosing a location, consider the system measurements
Space
as shown in Figure 2–1. Make sure to leave enough room for
Requirements
air to circulate around the system unit. Table 2–1 describes the
specific circulation requirements.
Figure 2–1 Dimensions of System
Monitor When allocating space for your new workstation, consider also
Requirements the size of your monitor. For your convenience, the monitor cable
that Digital provides allows you to place your monitor up to 10
feet away from the system unit.
Floor Stand If you are installing your system in a floor stand, see the guide,
Considerations BA47X-AA Vertical Floor Stand: Installing Your System.
2–2 Preparing to Install Your System
53 cm
44.5 cm
(20 in)
(17.5 in)
12.7 cm
(5 in)
MLO-009191