Connecting To An Aui Ethernet Network; Steps For Connecting An Aui Ethernet Network - DEC 600s Owner's Manual

Connecting to an AUI Ethernet Network

Connecting to an AUI Ethernet Network
Procedure To connect your system to an AUI Ethernet network, sometimes
Overview referred to as thickwire or standard Ethernet, complete the steps
in Table 5–2.
Table 5–2 Steps for Connecting an AUI Ethernet Network
Step
1
2
3
If the loopback connector is still connected to your system,
Step 1:
Loopback remove it now. Keep the loopback connector in a safe place. You
may need it later for testing purposes.
Connector
Connect the AUI Ethernet cable (BNE4C-xx) to the AUI port on
Step 2: AUI
the rear of the system unit as shown in Figure 5–1.
Ethernet Cable
5–4 Connecting Your System to a Network
Action
Remove the loopback connector.
Connect the AUI Ethernet cable.
Push the sliding connector lock to secure cable.