Remote Network Wake-Up (Digital Pc 5510 Only) - DEC Digital PC 3500 System Reference Manual

Remote Network Wake-up (DIGITAL PC 5510 Only)

Your computer features remote network wake-up technology that allows easy system
management of networked client computers, even if the system power switch is
turned off.
Utilizing Magic Packet software, developed by AMD, the system hardware design
provides standby power to the integrated network interface controller. The controller
can then power on the system when it receives an authorized network wake-up
signal.
Additional system security is provided by a SecureON feature that provides greater
system protection against unauthorized network intrusion. The system BIOS settings
enable either wake-up modes or allow bypass of client password protection by the
system administrator.
To set the Remote Network Wake-up feature:
1. Reboot the computer and enter Setup.
2. Highlight the "Advanced" menu.
3. Highlight "Integrated Network Controller."
4. Press the [+] key to set to Enabled, if necessary.
5. Highlight "Remote Network Wake-Up."
6. Press the [+] key to one of the available options.
7. Press [Esc] twice then [Enter] twice to exit the BIOS Setup utility and to
reboot the computer so changes immediately take effect.
NOTE
"Magic Packet" provides basic wake-up capabilities allowing the system to
be powered up remotely. Selecting "SecureON" increases security by
requiring a password for access to the network.
For more information, refer to your ClientWORKS and/or System Software
documentation.
: This setting defaults to "Disabled." Changing the feature to
Using the BIOS Setup Utility
2-11