Connecting To A 10Base-T Network - DEC 3000 500 Owner's Manual

Connecting to a 10BASE-T Network

Connecting to a 10BASE-T Network
Procedure To connect your DEC 3000 Model 500/500S AXP system to a
Overview 10BASE-T network, sometimes referred to as a twisted-pair
network, complete the following tasks.
1. Connect the 10BASE-T cable to the 10BASE-T port on the
2. Connect the other end of the cable to the network connection.
5–6 Connecting the System to a Network
back of the system unit as shown in Figure 5–2, making sure
that the cable is attached securely.