Table of Contents
Advertisement
1
Installation Procedure
This chapter shows you, step by step, how to install the MicroVAX 3100
Model 85/95.
Step 1: Choosing a Suitable Location
Follow these guidelines when you choose where to place the system unit:
•
Place the system unit where the room temperature is between 10°C and 40°C
(50°F and 104°F) and the humidity is between 10% and 90%.
•
Place the system unit at least 1 metre (3 feet) from heaters, photocopying
machines, or other operating equipment.
•
Place the system unit in a well-ventilated location.
•
Place the system unit on a work surface, which is raised above the floor.
•
Keep the air vents on either side of the system unit clear.
•
Do not place the system unit on its side.
• . Do not expose the system unit to direct sunlight or abrasive particles.
Note _________________________________________________________ _
A console terminal is required for this installation, but is not supplied
with the system. You can order one from your DigitaFM sales
representative.
Installation Procedure 1-1
Advertisement
Chapters
Table of Contents
