HYOSUNG GF125 Service Manual page 96

FLOAT ADJUSTMENT
● To check the float height, invert the carburetor body,
holding the float arm pin so that the pin will not slip
off.
Float height
● Check to be sure that the float moves freely.
● Install the new O-ring ④ and float chamber groove ⑤.
● Install the float chamber and screw.
ACCELERATOR PUMP ADJUSTMENT
NOTE:
D o n o t a d j u s t e x c e p t f o r e x c h a n g e a d j u s t
screw.
● Adjust idling (Refer to page 2-10).
● Adjust throttle grip (Refer to page 2-10).
● Adjust clearance of accelerator pump rod after loosen
the lock nut and turn the adjust screw.
Clearance
● Tighten the lock nut.
● Install the fuel tube and drain tube.
12.5 mm
0 mm
FUEL AND LUBRICA TION SYSTEM 4-8
④⑤
Lock nut
Adjust screw