HYOSUNG GF125 Service Manual page 111

5-11 ELECTRICAL SYSTEM
STATER MOTOR REASSEMBLY
BRUSH HOLDER AND HOUSING END
When fixing brush holder to starter motor case, align the
protrusion ① of the starter motor case with the notch ②
of the brush holder.
SECURING SCREWS
Apply therad lock "1342"to starter motor securing screws.
99000-32050
STARTER RELAY INSPECTION
Disconnect lead wire of the starter motor at starter relay.
Turn on the ignition switch, inspect the continuity between
the terminals, positive and negative, when pushing the
starter button.
If the starter relay is in sound condition, continuity is
found.
99000-25002
Check the coil for "open" , "ground"and ohmic resis-
tance. The coil is in good condition of the resistance is as
follows.
99000-25002
STD resistance
Thread Lock "1342"
Pocket tester
Pocket tester
Approx.3-4 Ω
① ②