6-33 CHASSIS
● Rotate the inner race by hand to inspect whether
abnormal noise occurs and it rotates smoothly.
Replace the bearing if there are any defects.
AXLE SHAFT
Using the special tools, check the axle shaft for runout
exceeds the limit.
09900-20606
09900-20701
09900-21304
Service limit
WHEEL RIM
Make sure that the wheel rim runout does not exceed the
service limit when checked as shown.
NOTE:
Worn or loose wheel bearing must be replaced before
attempting to true a wheel rim.
Service limit
TIRE (see page 2-14)
SPROCET
Inspect the sprocket teeth for wear. If they are worn as
illustrated, replace the sprocket and drive chain.
Dial gauge (1/100)
Magnetic stand
V-block (100mm)
0.25 mm
2.0 mm
Normal wear
Excessive wear