Setting The Breakaway Option; Switching Out-In Combinations; Confirming Settings - Kramer VP-4x4K User Manual

2. Press the TAKE button to confirm the modification (reconfiguring the audio
according to the video).
7.5.2

Setting the Breakaway Option

To set the Breakaway option:
1. Press either the AUD (for audio control only) or the VID (for video control
only) button.
2. If the AUD button illuminates, all switching operations relate to the Audio
section.
3. If the VID button illuminates, all switching operations relate to the Video
section.

7.6 Switching OUT-IN Combinations

To switch a video/audio input to a video/audio output, do the following:
1. Press an OUT button
The corresponding Audio and
blink.
By default, the OUT button selection times out after 10 minutes. You can press
and hold the OUT button for about 2 seconds to have the OUT button selection
remain until you select otherwise
2. Press an IN button
The selected input switches to the selected output.
For example, press the ALL button and then IN button # 2 to connect
input # 2 to all the outputs.

7.7 Confirming Settings

Choose to work in the AT ONCE or the CONFIRM mode.
In the AT ONCE mode:
•
You save time
•
Actions require no user confirmation
•
Execution is immediate
•
No protection is offered against changing an action in error
1 Either 1, 2, 3, 4 or ALL. To exit this command, press the OUT button again
2 When the audio-follow-video option is active (refer to section 7.5.1)
3 Items 8 and 9, respectively, in
4 This operation practically cancels the 10 minute timeout
5 Either 1, 2, 3, 4 or OFF. If the IN button is not pressed within 20 seconds, this operation times out
20
Operating Your Audio Matrix Switcher
1
.
2
/or Video IN STATUS 7-segment displays
5
.
Figure 1
4
.
KRAMER: SIMPLE CREATIVE TECHNOLOGY
3