Table of Contents
Advertisement
7.2.2 The REL AUDIO LEVEL 7-Segment Display
The REL AUDIO LEVEL display, as illustrated in
7.7).
7.3
Confirming Settings
You can choose to work in the At Once or the Confirm mode.
In the At Once mode (TAKE button does not illuminate):
•
Pressing an OUT-IN combination implements the switch immediately
•
You save time as execution is immediate and actions require no user
confirmation
•
No protection is offered to allow the correction of an erroneous action before
it is implemented
In the Confirm mode (TAKE button illuminates):
•
You can key-in several actions and then confirm them by pressing the TAKE
button, to simultaneously activate the multiple switches
•
Every action requires user confirmation, protecting against erroneous
switching
•
Execution is delayed
7.3.1 Toggling between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes, do the following:
1. Press the TAKE button to toggle from the At Once mode (in which the
TAKE button does not illuminate) to the Confirm mode (in which the
TAKE button illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the Confirm mode
back to the At Once mode.
Actions no longer require user confirmation and the TAKE button no
longer illuminates.
1 Failure to press the TAKE button within 40 seconds (the Timeout) will abort the action
22
Operating the VP-8x4AK
Figure 13: REL AUDIO LEVEL 7-segment Display
1
until the user confirms the action
Figure 13
KRAMER: SIMPLE CREATIVE TECHNOLOGY
(see
Section
Advertisement
Table of Contents
