Status Display During Normal Operation; Status Display During Audio Gain Level Setting; Figure 15: Status Display 5 Seconds After Turn On; Figure 16: Status Display During Normal Operation - Kramer VP-885 User Manual

7.4.2 Status Display During Normal Operation

During normal operation, the STATUS display shows which inputs are
switched to which outputs (see

Figure 16: Status Display During Normal Operation

In the VIDEO mode, the display shows the video signal configuration. In the
AUDIO mode, the display shows the audio signal configuration. In the AFV
mode (see Section

7.4.3 Status Display During Audio Gain Level Setting

During audio gain level setting, the Status display indicates:
• Whether an INPUT or OUTPUT is selected (in this example, OUTPUT)
• Which channel number is selected (in this example, 3)
• The current gain setting in 0.5dB increments (in this example, -4.5). The
0.5dB is indicated by the period following the 4.

Figure 17: Status Display Showing OUTPUT 3, Gain -4.5

22
Operating the VP-885

Figure 15: Status Display 5 Seconds After Turn On

7.5.1), the display shows both signal configurations.
Figure 16).
KRAMER: SIMPLE CREATIVE TECHNOLOGY