Table of Contents
Advertisement
Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
STATUS 7-segment display that are changed, flash
TAKE button to confirm the modification. The audio follows the
video
8.1.2 Setting the Breakaway Option
To set the Breakaway option:
Press either the AUDIO (for audio control only) or the VIDEO (for video
control only) button:
If the AUDIO button illuminates, switching operations relate to
audio
If the VIDEO button illuminates, switching operations relate to
video
8.2
Switching OUT-IN Combinations
To switch a video/audio input to a video/audio output, do the following:
1. Press an OUTPUT SELECTOR button.
The corresponding input number in the INPUT STATUS 7-segment display
flashes.
2. Press an INPUT SELECTOR button.
The selected input switches to the selected output.
For example, press the ALL button and then INPUT SELECTOR button # 2
to connect input # 2 to all the outputs.
8.3
Confirming Settings
Choose to work in the AT ONCE or the CONFIRM mode, as section
describes. When the VP-1608 operates in the AT ONCE mode, pressing an
OUT-IN combination implements the switch immediately. In the
CONFIRM mode, the TAKE button must be pressed to authorize the
switch.
In the AT ONCE mode, you save time as execution is immediate and
actions require no user confirmation. However, no protection is offered
against changing an action in error.
In the CONFIRM mode:
You can key-in several actions and then confirm them by pressing
the TAKE button, to simultaneously activate the multiple switches
1 Warning that you are about to modify the audio configuration for AFV operation
18
1
. Press the
KRAMER: SIMPLE CREATIVE TECHNOLOGY
8.3.1
Advertisement
Table of Contents
