Blocking Calls From Callers That Are Not Specified (Mode 306) - Konica Minolta bizhub 362 User Manual

10

Blocking calls from callers that are not specified (mode 306)

This mode can be set if the optional fax kit is installed. Specify whether or not
only faxes (G3) received from callers with a specified F-code (bulletin
board/confidential/forwarding) can be received and all other faxes (G3) are
blocked.
Factory settings
Bit
Setting
Specifying settings
The shaded cells indicate the settings selected during production.
Bit
7
6, 5, 4, 3,
2, 1, 0
Note
If bit 7 is set to "1", a setting for "All Other Documents" (displayed by
touching [Admin. 1], then [RX Document]) cannot be specified.
10-36
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description
Specifies whether or not to
block calls from callers that
are not specified.
-----------------------------
Specifying management settings
Setting Description
0 Does not block
1 Blocks
0000000 *Do not change these bits
when specifying settings for
this function.
Page
Refer-
ence
---------
---------
bizhub 362/282/222