Specifying The Transmission Report Printing Conditions - Konica Minolta bizhub 362 User Manual

Internet faxing
5
Select the name of the transmission
source, and then touch [Enter].
– Touch [OFF] to cancel the
setting.

Specifying the transmission report printing conditions

You can specify the conditions for printing a transmission report (TX Report).
The printing conditions for a transmission report are preset with the Report
Settings parameters from the Administrator Management screen. Select the
appropriate printing condition.
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [Setting 1], then [TX Report].
– If the optional fax kit has been
installed, touch [Set 1], then [TX
Report].
3
Check the printing conditions, and
then touch [Enter].
bizhub 362/282/222
7
7-19