Specifying management settings
Specifying the deleting method for [Del.] in input screens (mode 478)
Specify the deleting method for [Del.] in input screens.
Select whether the character at cursor's position or the character to the left
of the cursor is deleted.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7
6, 5, 4, 3, 2,
1, 0
Note
North American model default setting: 1
Other model default setting: 0
bizhub 362/282/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description
Setting
Specify the deleting
0
method for [Del.] in
input screens.
1
-----------------------
0000000
Description
Deletes the character at
the cursor's position
Deletes the character to
the left of the cursor
*Do not change these bits
when specifying settings
for this function.
10
Page Refer-
ence
page 13-5
----------
10-59