Changing Or Deleting A One-Touch Dial Button - Konica Minolta bizhub 362 User Manual

4

Changing or deleting a one-touch dial button

1
Perform steps 1 through 4 of the
procedure in "To program a one-
touch dial button".
2
Touch the one-touch dial button to be change or deleted.
– If the specified one-touch dial button is programmed as an
administrator forwarding destination, the screen for entering the
administrator number appears.
3
Touch the button for the information
to be changed, and then make the
change.
– To delete the information, touch
[Delete], check that the correct
information is to be deleted, and
then touch [OK].
4
Check the information to be registered, and then touch [Enter].
5
Touch [Enter] until the initial screen appears.
4-36
Scan to E-Mail
bizhub 362/282/222