Specifying E-Mail Security Functions (Mode 380) - Konica Minolta bizhub 362 User Manual

10

Specifying e-mail security functions (mode 380)

You can specify security functions when receiving and sending e-mail
messages.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7
6
5
4
3
2
1, 0
(*1)
The SMTP authentication function is enabled when all of the conditions
described below have been met.
- Bit 6 of mode 380 is set to "1".
- The SMTP authentication user name & password and the POP3 user
name & password are being shared, and bit 2 of mode 380 is set to "0".
10-48
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description
Specifies whether to enable
the e-mail reception authen-
tication (APOP authentica-
tion) function.
Specifies whether to enable
the e-mail transmission au-
thentication (SMTP authenti-
cation) function.(*1)
Specifies whether to prohibit
the e-mail transmission au-
thentication (CRAM-MD5
authentication) function.(*2)
Specifies whether to prohibit
the e-mail transmission au-
thentication (LOGIN authen-
tication) function.(*2)
Specifies whether to prohibit
the e-mail transmission au-
thentication (PLAIN authen-
tication) function.(*2)
Specifies whether to enable
sharing of the SMTP authen-
tication ID & password with
the POP3 user name & pass-
word.
-----------------------------
Specifying management settings
Status Description
0 No
1 Yes
0 No
1 Yes
0 Not prohibited
1 Prohibited
0 Not prohibited
1 Prohibited
0 Not prohibited
1 Prohibited
0 ID and password shared
1 ID and password not shared
00 *Do not change these bits
when specifying settings for
this function.
Page Ref-
erence
---------
page 3-19
page 3-25
---------
page 3-19
page 3-25
---------
---------
---------
bizhub 362/282/222