Konica Minolta bizhub 362 User Manual page 406

10
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7
6
5
4
3
2, 1, 0
*1
If bit 6 is set to "1", the settings will not be applied if bit 5 is set to "1" (not
displayed). If you do not wish to display the fax number or address of the
recipient, bit 6 must also be set to "1" (settings can only be specified in
Administrator mode).
*2
If the recipient is directly specified from the Direct Input tab, the recipient
is displayed, even if "1" (not displayed) is selected.
10-58
Description Setting
Specifies whether or 0
not the use of the
1
computer (scanner)
is prohibited.
Specifies whether 0
settings for register-
ing mail addresses
1
or printing reports
can be specified by
only the administra-
tor or also by the us-
er.
Specifies whether or 0
not only recipient
1
names are displayed
(and the fax number
or address is not
displayed) in reports
and Job List screens
and when a one-
touch dial button is
* *
touched. 1, 2
----------------------- 0
Specifies whether or 0
not the use of TCP-
1
Socket is prohibited.
----------------------- 000
Specifying management settings
Description
Permitted
Prohibited
Settings can also be
specified by users.
Settings can only be
specified in Administrator
mode.
Displayed
Not displayed
*Do not change this bit
when specifying settings
for this function.
Permitted
Prohibited
*Do not change these bits
when specifying settings
for this function.
bizhub 362/282/222
Page Refer-
ence
----------
page 10-17
----------
----------
----------
----------