Table of Contents
Advertisement
5.2 Settings Worksheet
Use this worksheet to record your current local area network, Access Point and
CIPHER Scanner Agent server port settings. The purpose of the worksheet is to make
it easier to keep track of these settings for the various configuration activities you will
be performing throughout Chapter 2 - Installation and Configuration.
Section 1 - Current Local Area Network Settings
Record the following settings from the Internet Protocol (TCP/IP) Properties
page on your Local Area Network (LAN). For more details on how to access
these settings, refer to Steps 3 through 6 (in Section 4.2.2):
1
LAN IP Address:
2
LAN Subnet Mask:
3
LAN Default Gateway:
4
LAN DNS Server:
Section 2 - Access Point Settings
Once you have reconfigured Access Point in Step 11 in Section 4.2.2,
record the following settings from the Internet Protocol (TCP/IP) Properties
page on your network server or hub. For more details on how to access
these settings, refer to Steps 3 through 6 in Section 4.2.2. Settings for
up to five Access Point receivers can be recorded in this section.
Access Point 1
5
Access Point IP Address:
6
Access Point Subnet Mask:
7
AP Name:
8
PIN Code:
82
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
____ . ____ . ____ . ____
____ . ____ . ____ . ____
____ . ____ . ____ . ____
____ . ____ . ____ . ____
____ . ____ . ____ . ____
____ . ____ . ____ . ____
_________________
_________________
Advertisement
Table of Contents
