Table of Contents
Advertisement
4.5.6 Server Port Address Setting
1. To specify the TCP/IP server port address for the server that is running the CIPHER Scanner
Agent software, press <6> in the WLAN Settings menu. The currently assigned TCP/IP server
port address setting displays in the scanner information window (Figure 80).
2. Enter the TCP/IP server port address (of the server that is running the CIPHER Scanner
Agent software) into the New field, then press the
and return to the WLAN Settings menu. It must be a value between 1 and 65538 and must
within the range of ports created in the server on which the CIPHER Scanner Agent software
is being run (see Section 2.5 - Loading and Configuring CIPHER Scanner Agent
Software). Use the port setting that is next to the Assigned Scanner IP address you
recorded for the scanner in Section 3 of the Settings Worksheet.
3. When finished entering all required settings into the WLAN Settings menu, press the
<Esc>, and then press the
it off.
You can now proceed to Chapter 3: Using Wireless Scanners with
Furniture Wizard to learn how to use hand-held scanners to capture and
transmit inventory and sales data to Furniture Wizard.
80
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Figure 80: Server Port Setting
<Power>
in the lower right front corner of the scanner to power
<Blue Enter>
key to save the setting
Advertisement
Table of Contents
