CipherLab CIPHER Lab CPT-8061 Use And Installation Manual page 76

2. When in the Bluetooth Menu, select <5> (Pairing Test), followed by the
3. The scanner will now wait for a few moments while it searches for available Bluetooth
(Access Point) devices. The name of the Access Point should appear up in the list of available
devices in the scanner display window.
4. Select the Access Point you have just configured, and press the
5. You will now be presented with a menu asking for both Authentication and Access PIN.
Select Authentication and press the
Press <1> to enable Authentication, then press <Esc>.
Press the <Down Arrow> key to select Pin Code, and press the
Enter the PIN code previously assigned to Access Point (in Step 4 in Section 4.2.2),
then press <Esc>. You can also find the PIN code in Section 2 of the Settings
Worksheet.
72 Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Figure 70: Bluetooth Menu
Press <5>, followed by
<Blue Enter>
<Blue Enter>
<Blue Enter>
key.
<Blue Enter>
key.
<Blue Enter> key.
key.